Manitou » Maniaccess » MANIACCESS 150 AETJ-C

Height :   1.97 m
Weight :   6700 kg

The Manitou 150 AETJ-C electric articulated platform is the lightest in its category of which the wheels leave almost no marks on the ground.

With a capacity of 200 kg and a working height of up to 15 m, this self-propelled platform is the ideal solution for your handling and maintenance operations. Its traction battery can be recharged a large number of times and has a long working life. In running mode, the 150 AETJ-C does not exceed 2 m in height. Its compactness will enable you to find a storage location for it very quickly. To increase ease of access to working areas, a 3D version pendular arm is available (option).



Lifting height 13 m 42’8″
Lifting capacity 200 kg 441 lb
Lifting capacity (no. of people) 2
Exterior lifting capacity (no. of people) 2
Max reach 7.6 m 24’11”
Overhang 7.152 m 23’6″
Moving speed 5 kmh 3.11 mph
Working speed 0.6 kmh 0.37 mph


Overall length 6.05 m 19’10”
Overall length (folded) 4.4 m 14’5″
Wheelbase length 2 m 6’7″
Width 1.5 m 4’11”
Height 1.97 m 6’6″
Overall height (folded) 2.08 m 6’10”
Weight (unladen) 6700 kg 14740 lb
Turning radius 3.96 m 12’12”
Ground clearance 0.14 m 0’6″



Standard equipments

Integrated diagnostic assistance
Horn in the platform
Emergency stop button in platform and on frame
CAN bus technology
Pendular arm
230V Predisposition
Audible alarm and illuminated indicator lamp (leveling, overload, lowering)
Battery charge indicator lamp
Platform with open-work floor
Hour meter
Proportional controls
Traction battery
Non-marking rubber tires
Slinging and securing rings
Tool box in platform
Multi-voltage integrated charger
Negative-type braking on rear wheels
Travel possible at maximum height
Manual emergency lowering
Optional equipments

Personalized paintwork
230V plug with differential circuit-breaker
Biodegradable oil
Beep upon travel
Air predisposition
Basket 1 200 mm
SMS : Safe Man System
Extreme cold oil
Flashing Light
Water predisposition
Protective cover for control panel
Working headlight in platform
Highly efficient battery
Maintenance-free battery
Beep on every movement
Safety harness
Initial verification report before putting into service
Centralized recharging of battery





Labour and site visits.
Regular maintenance operations.
The technician carries out all the operations recommended by the manufacturer in the operator’s manual.
Preventive checks.
Provision of end-of-visit report.
After each visit, the technician will provide you with a report of the checks carried out.

Mandatory safety control visit (according to current legislation)
Advanced Service

Initial Service +
Genuine Manitou spare parts and lubricants.
The technician uses exclusively Manitou parts and products, which improves the reliability of your machine.

Mandatory safety control visit (according to current legislation)
Warranty extension
Washing of the machine
Fleet management solutions
Activity report
Replacement of worn parts
Excellence Service

Advanced Service +
Reparatory maintenance operations.
The technician undertakes the repair of all breakdowns (except in the case of accidents and damage).

Mandatory safety control visit (according to current legislation)
Washing of the machine
Fleet management solutions
Activity report